You need a license to use Instlist and MarketChange to get one send the account number you wish to use the Indicators on to support@tribeoftraders.servicecamp.com 

If you have any ideas or suggestions for improvements feel free to send these to feedback@tribeoftraders.servicecamp.com

Instlist:

This allows you to analyse your charts quickly, by using the UP and Down Arrow  on your keyboard to  change Instruments and with the Left and Right key you change timeframes (only the following timeframes – 15 min, 30 min, 4hour and Daily)

To Use : Simply drag Instlist onto any chart (to get the instruments in the order listed below use the AUDUSD chart to start) from the Navigator box – you will find it under Indicators

Change the INPUTs as required:

To access the inputs once you have placed InstList on a chart – right click on the chart – select indicator list – click on instlist and edit – inputs – for example if your broker has no suffix and you need to remove (£) click into SUFFIX 1 –  delete (£) and press OK.

This is Broker and account type dependent.

If your Instruments have a prefix – such as a full stop –  . –   please enter this in the  prefix1 field, if there are no prefixes leave Prefix1 blank. E.g. –    .USDJPY vs USDJPY  (the difference here is the FIRST USDJPY has a DOT before it and the second one does not have a dot)

If your instruments have a suffix such as (£) or .pro please enter the suffix into the Suffix1 field, again if there are none leave the Suffix1 fireld blank – e.g IG uses a suffix of (£)  as defaulted below so USDJPY = USDJPY(£)

The Allow DLL imports on the Common tab must be ticked. This will be ticked automatically if you set the Tools – Options – Allow DLL imports option previously.

Instrument order:

“AUDUSD”
“EURUSD”
“GBPUSD”
“NZDUSD”
“USDCAD”
“USDCHF”
“USDJPY”
“EURAUD”
“EURCAD”
“EURCHF”
“EURGBP”
“EURNZD”
“GBPAUD”
“GBPCAD”
“GBPCHF”
“GBPNZD”
“AUDJPY”
“CADJPY”
“CHFJPY”
“EURJPY”
“GBPJPY”
“NZDJPY”
“AUDCAD”
“AUDCHF”
“AUDNZD”
“CADCHF”
“NZDCAD”
“NZDCHF”
“USDSGD”
“AUDSGD”
“NZDSGD”
“SGDJPY”
“EURSGD”
“GBPSGD”
“USDSEK”
“EURSEK”
“NOKSEK”
“XAUUSD” 

Installation:

Open the “Instlist.zip” file this should be in your downloads directory once you have downloaded it.

Double click on the zip file to show the files inside of it.

Right click and select Copy on the file  “InstList.ex4”

On your VPS (if using), go to the terminal you plan to use InstList on,

Select  File – Open Data Folder – MQL4 – INDICATORS, paste the copied file (InstList.ex4) here.

Return to your terminal, Go to Navigator, right click on the word – Indicators  –  and select refresh and Instlist will appear here.

Additional once off setup –

NB! In order for Instlist to work you need to enable DLL imports.

Do this by selecting Tools – Options – expert Advisors – tick “Allow DLL imports”

As shown in the image below –

MarketChange:

This shows you the Daily and Weekly price change that the instrument has experienced. Used either by itself or together with the InstList indicator for analysis. When used together with InstList  – it automatically adjust according to the Instrument selected.

I suggest using these 2 indicators on the same charts and you can simultaneously see the percentage change with each instrument you flick between – using only your Up / Down and Left / Right arrow on your keyboard.

 Installation & Use:

Open the “MarketChange.zip” file this should be in your downloads directory once you have downloaded it.

Double click on the zip file to show the files inside of it. Right click and select Copy on the file  “MarketChange.ex4”

On your VPS (if using), go to the terminal you plan to use MarketChange on,

Select   File – Open Data Folder – MQL4 – INDICATORS, paste the copied file (MarketChange.ex4) here.

Return to your terminal, Go to Navigator, right click on Indicators and select refresh and MarketChange will appear here.

Additional once off setup for the terminal –

NB! In order for MarketChange to work you need to enable DLL imports. Do this by selecting Tools – Options – expert Advisors – tick “Allow DLL imports”

As shown in the image below –

To Use : Simply drag MarketChange onto any chart from the Navigator box – you will find it under Indicators

The only input is to choose where to display the Movement data – this is defaulted to 1 – which is top right of the screen:

Possible values:

0: Top Left Corner

1: Top Right Corner

2: Bottom Left corner

3: Bottom Right Corner

The Allow DLL imports on the Common tab must be ticked. This will be ticked automatically if you set the Tools – Oprtions – Allow DLL imports option previously.

For Support contact –   support@tribeoftraders.servicecamp.com

Website  –   www.tribeoftraders.com